KpyM Telnet/SSH Server - Forum
Beginner problems
Karl Beginner problems
 
1) I've just installed the telnet server, but my second computer cannot connect to it. The ping command works OK, but the telnet client tells that it cannot open the connection.
2) How can I disable the login/password prompt?
3) How can I make a telnet program (command line or TUI) for the client interface?


Kroum Grigorov
 
1)... the telnet client tells that it cannot open the connection.
By default KTS will install as SSH server. If you need telnet server make sure you choose "install as telnet server" in the setup wizard.
If your computer is behind firewall/router you will have to first allow port 22(SSH) or 23(telnet) to accept connections from outside your machine.

2)How can I disable the login/password prompt?
You can use the default_user/default_pass for this(for telnet sessions only)
You can find more info here

3)How can I make a telnet program (command line or TUI) for the client interface?
Just create a regular console application. Any console application should work fine with KTS.

Kroum


Deathkiller
 
Hello i want to use my telnet server to acces my pc and use it from other pc to distrued al kind of things but

i installt it
i cant find the login info anywhere
there is no file i cant use/edit to create acount en custimuse them

can sombody explane these things to me ?

greeting Deathkiller


Kroum Grigorov
 
> there is no file i cant use/edit to create acount en custimuse them
KTS uses the windows accounts to validate your login, so just use your windows account and password to log in

Kroum


Sujit Joshi
 
I am trying to login in to host A (running telnet server) from client B (running putty).
Kroum Grigorov says "KTS uses the windows accounts to validate your login, so just use your windows account and password to log in ".
Everybody is saying use username and password of Winnt account ???But I cant figure out where on earth I can find that information.If you are telling me its the same info shown in
Control Panel->User accounts of host A then i think you are wrong.
It doesn't work.
Bottom line--
I cannot login to host A from B by using information obtained from Control panel-->User accounts of A.
ANy help will be highly appreciated. I am confused.


Kroum Grigorov
 
> I cant figure out where on earth I can find that information.

In short, you should use the same login/password that you use to log into your windows on host A.
Note that you MUST have "Password protected" account, KTS will not log you in when running in SSH mode if your account does not have password.

>If you are telling me its the same info shown in
Control Panel->User accounts of host A then i think you are wrong.

Yes these are the same accounts you see in Control Panel->User accounts, all you need is an account from "User accounts" AND the account password that you should already know.

Kroum


PlateUmp
 
I had the same problem...till I realized that just creating a password and logging out didn't do the job. I had to completely shutdown my system before it took the password and 'registered' it with KTS.

All works now.


imba
 
i keep getting messages saying "telnet" is not reconizable output or internal command..operable program or batch file

is this suppose to happen?

or will it change when i put an ip adress after it


Kroum Grigorov
 
If this is Vista you have to "enable" the telnet client first
http://www.bridgetonova.com/2007/09/how-to-enable-telnet-in-vista.html

Anyway I can recommend you to use PuTTY instead

Kroum


robert
 
hi im robert, im 12 years old..it is so embarrassing to ask but how to use KpyM telnet? how can i use it with windows telnet?i want to play chess in a chess server?can you please tell me some basics.thanks!!!


Kroum Grigorov
 
> i want to play chess in a chess server
Not sure what exactly you want to do, but you might find these links interesting
http://www.ehow.com/how-does_4613825_telnet-work.html
http://en.wikipedia.org/wiki/Telnet
http://home.att.net/~gobruen/net/telnet.html
http://www.ehow.com/how_8472_connect-remote-computer.html
http://en.kioskea.net/contents/utile/telnet.php3

Kroum


aric
 
im only 12 too but I know how to use telnet. How do you attach a batch program to the telnet server so when people telnet to your address the batch program opens, life for example a game such as tic tac toe? Please reply. Thx.


Bjцrn
 
I do not what IP I should write under "Daemon IP".

Cincerely

Bjцrn


Me
 
Hello. I am TRYING to use KpyM to let people connect from remote computers to a program I have. I have this question:

How to I set up KpyM to send a remote computer that specific program? (or at least the output)


 

© 2007 - 2008 Kroum Grigorov
Powered by phpBB © 2001, 2005 phpBB Group