KpyM Telnet/SSH Server - Forum
| Connection closed by remote host |
| Daniel Berger |
Connection closed by remote host |
Oct 03 2007 12:29 |
| |
Hi,
I installed kpym 1.15c on a Win2k box and was able to connect to it just fine. Then I installed DynDNS, and now I get this error whenever I try to connect to the ssh server:
daniel-bergers-computer:~ djberge$ ssh -v -l rubygems rubydev.homedns.org
OpenSSH_4.5p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to rubydev.homedns.org [168.103.74.137] port 22.
debug1: Connection established.
debug1: identity file /Users/djberge/.ssh/identity type -1
debug1: identity file /Users/djberge/.ssh/id_rsa type -1
debug1: identity file /Users/djberge/.ssh/id_dsa type -1
debug1: ssh_exchange_identification: Sep 8 12:00:10 klogd: klogd started: BusyBox v0.61.pre (2005.04.26-00:08+0000)
debug1: ssh_exchange_identification: Doing BRCTL ...
debug1: ssh_exchange_identification: setfilter br0 0
debug1: ssh_exchange_identification: /var/tmp/act_firewall: No such file or directory
debug1: ssh_exchange_identification: insmod: ipt_REJECT.o: no module by that name found
debug1: ssh_exchange_identification: msntp: too many bad or lost packets
ssh_exchange_identification: Connection closed by remote host
I tried uninstalling and reinstalling kpym after I had setup DynDNS, but that didn't help. I also tried connecting from another machine I have in the house with the same result.
Any ideas?
Thanks,
Dan
|
| Kroum Grigorov |
|
Oct 03 2007 19:48 |
| |
Hi,
First make sure KTS is running on your Win2k box by trying "ssh localhost" on that machine. If you can log in then KTS is OK.
Check if your DynDNS client is set up correctly, check if it send your "real" IP to the DNS.
Check if you can ssh to your box by using its IP instead of host name.
Check if your box is not behind a firewall or router.
Kroum
|
| Daniel Berger |
|
Oct 04 2007 02:07 |
| |
Hi Kroum,
I tried your suggestion. I'm able to 'ssh localhost', as well as ssh to my internal IP (192.168.x.x). I was not, however, able to ssh to my external IP.
I have DSL, connected through an Actiontec Gateway, btw. No firewall running afaik (Zone Alarm is shut down).
Where do I go from here? Is this a DynDNS config issue or a DSL issue? If so, I have no clue where to go from here.
Thanks,
Dan
|
| Kroum Grigorov |
|
Oct 04 2007 15:38 |
| |
> I was not, however, able to ssh to my external IP
It looks to me like some config problem in your LAN.
Make sure you have correctly configured some port forwarding between your external IP(I assume that's your DSL device) and your internal IP(that should be your Win2k box)
Refer to your DSL device manual for more info on how to configure port forwarding.
Kroum
|
| Nicolas |
You have a modem-router ? |
Jan 06 2008 22:43 |
| |
Hello, sorry for my english my native language is spanish. I think that you have a modem-router, that you DON'T configure to forward de ssh port (22). And, when you try to connecto to your win server box by de Dyndns domain. Really you connecto to the modem-router box.
nicolas.ard (at) ardsoluciones.com.ar
|
© 2007 - 2008 Kroum Grigorov
